Materials Science Newswire (Page 3)

Comprehensive Real-Time News Feed for Materials Science. (Page 3)

Results 41 - 60 of 1,322 in Materials Science

  1. 10 Livermore Lab researachers named 2014 APS FellowsRead the original story

    Thursday Jan 15 | Pleasanton Weekly

    ... for metals, alloys and interfaces and for the dissemination of these techniques in condensed matter and materials science." "I am grateful and humbled by the honor bestowed by my colleagues and can only hope to remain worthy of it," Gonis said. ...

    Comment?

  2. Particles Play with Concrete StrengthRead the original story w/Photo

    Wednesday Jan 14 | PaintSquare

    ... grains and colloids. Shahsavari is an assistant professor of civil and environmental engineering and of materials science and nanoengineering and a member of the Richard E. Smalley Institute of Nanoscale Science and Technology at Rice. Jalilvand is ...

    Comment?

  3. Crush those clinkers while they're hotRead the original story w/Photo

    Tuesday Jan 13 | Science Daily

    ... supported the research. Shahsavari is an assistant professor of civil and environmental engineering and of materials science and nanoengineering and a member of the Richard E. Smalley Institute for Nanoscale Science and Technology at Rice. Chen is ...

    Comment?

  4. Atomic placement of elements counts for strong concreteRead the original story w/Photo

    Tuesday Jan 13 | EurekAlert!

    ... College Dublin. Shahsavari is an assistant professor of civil and environmental engineering and of materials science and nanoengineering and a member of the Richard E. Smalley Institute for Nanoscale Science and Technology at Rice. The National ...

    Comment?

  5. Race of the electronsRead the original story w/Photo

    Tuesday Jan 13 | EurekAlert!

    ... area of research gives us new methods to develop quantum technologies and study fundamental questions of materials science and electronics", says Joachim Burgdorfer. Prof. Christoph Lemell Institute for Theoretical Physics Vienna University of ...

    Comment?

  6. JEOL and UC Irvine partner to develop electron microscopy and materials research centerRead the original story

    Oct 21, 2014 | Small Times

    JEOL USA and the University of California's Irvine Materials Research Institute have entered into a strategic partnership to create a premier electron microscopy and materials science research facility. The IMRI will serve as an interdisciplinary nexus for the study and development of new materials, enabling advances in solar cell, battery, semiconductor , biological science, and medical technologies.

    Comment?

  7. Atomic-level Forces at Play in ConcreteRead the original story w/Photo

    Tuesday Jan 13 | Painting/Wallcovering Contractor

    ... grains and colloids. Shahsavari is an assistant professor of civil and environmental engineering and of materials science and nanoengineering and a member of the Richard E. Smalley Institute of Nanoscale Science and Technology at Rice. Jalilvand is ...

    Comment?

  8. Nanowire-coated fabric keeps you warm and your...Read the original story

    Tuesday Jan 13 | RedOrbit

    ... it could reduce a household heating bill to almost nothing. Lead scientist Yi Cui of the Department of Materials Science and Engineering at Stanford told PopSci that the team started their research by looking for a wearable method of keeping ...

    Comment?

  9. Wonder material silicene still stands just out of reachRead the original story w/Photo

    Monday Jan 12 | Science Daily

    ... applications of the material. The above story is based on materials provided by National Institute for Materials Science . Note: Materials may be edited for content and length. Yukiko Yamada-Takamura, Rainer Friedlein. Progress in the materials ...

    Comment?

  10. New catalyst process uses light, not metal, for rapid polymerizationRead the original story w/Photo

    Tuesday Jan 13 | ECNmag

    A team of chemistry and materials science experts from University of California, Santa Barbara and The Dow Chemical Company has created a novel way to overcome one of the major hurdles preventing the widespread use of controlled radical polymerization. In a global polymer industry valued in the hundreds of billions of dollars, a technique called Atom Transfer Radical Polymerization is emerging as a key process for creating well-defined polymers for a vast range of materials, from adhesives to electronics.

    Comment?

  11. From the Bottom Up: Manipulating Nanoribbons at the Molecular LevelRead the original story

    Tuesday Jan 13 | Science, Industry and Business

    ... widths and chiralities. A third route, discovered by Roman Fasel of Swiss Federal Laboratories for Materials Science & Technology along with his co-workers, involves placing molecules on a metal surface and chemically fusing them together to form ...

    Comment?

  12. 3-D printed Shelby CobraRead the original story w/Photo

    Monday Jan 12 | Science Daily

    ... (accessed January 13, 2015). A team of chemistry and materials science experts has created a novel way to overcome one of the major hurdles preventing the widespread use of controlled radical A new 3-D printed vehicle pays homage to the classic ...

    Comment?

  13. Manipulating nanoribbons at the molecular levelRead the original story w/Photo

    Monday Jan 12 | R & D

    ... widths and chiralities. A third route, discovered by Roman Fasel of Swiss Federal Laboratories for Materials Science & Technology along with his co-workers, involves placing molecules on a metal surface and chemically fusing them together to form ...

    Comment?

  14. Oxford Chemistry Dictionary TrRead the original story w/Photo

    Monday Jan 12 | ZDNet Blogs

    ... Fully revised and updated, it boasts broader coverage in subject areas such as forensics, metallurgy, materials science, and geology, increasing the dictionarys appeal to students in these related fields. There are also biographical entries on key ...

    Comment?

  15. Three join National Academy of InventorsRead the original story

    Friday Jan 9 | PressReleasePoint

    Richard McCullough, Harvard's vice provost for research and a professor of materials science and engineering in the School of Engineering and Applied Sciences , has been named a fellow of the National Academy of Inventors, along with two of his Harvard colleagues. David A. Evans, a research professor and former chairman of the University's Department of Chemistry and Chemical Biology, and Chiang J. Li, a Harvard Medical School lecturer at Beth Israel Deaconess, were also named fellows.

    Comment?

  16. New magnesium alloy: World's strongest and lightest metalRead the original story w/Photo

    Friday Jan 9 | CNN

    ... carriers and implants used for bone fracture healing and joint replacement. Michele Manuel, professor of materials science and engineering at the University of Florida has developed a surgical pin made from magnesium and is working to control the ...

    Comment?

  17. New implant lets paralyzed rats walk againRead the original story w/Photo

    Friday Jan 9 | Fox News

    ... important to the proper operation of implants of this class," saidJohn A. Rogers, a professor of materials science and engineering at the University of Illinois, who was not involved in the research. Even though the work goes a long way toward ...

    Comment?

  18. 'Pop-up' fabrication technique trumps 3D printingRead the original story w/Photo

    Thursday Jan 8 | KurzweilAI.net

    ... group of John A. Rogers, the paper's third co-corresponding author and a Swanlund Chair and professor of materials science and engineering at the University of Illinois, in developing the structural designs of 2-D structures to form various classes ...

    Comment?

  19. The tiny ribbon that could help the paralysed walk again: 'Cyborg'...Read the original story w/Photo

    Thursday Jan 8 | Daily Mail

    ... build it, we had to combine expertise from a considerable number of areas,' said Courtine. 'These include materials science, electronics, neuroscience, medicine, and algorithm

    Comment?

  20. What's Better, Pop-Up Fabrication Or 3-D Printing?Read the original story w/Photo

    Thursday Jan 8 | Scientific Blogging

    ... group of John A. Rogers, the paper's third co-corresponding author and a Swanlund Chair and professor of materials science and engineering at the University of Illinois, in developing the structural designs of 2-D structures to form various classes ...

    Comment?