No Spark

Posted in the BMW Motorcycles Forum

Comments

Showing posts 1 - 2 of2

Ben Johnson

Dell City, TX

I washed my stripped down 98 R1100RT with a pressure washer and started It ran for a few minuter and started to miss intermittently making a "chuh" sound and then died and would not fire. I checked all the connections for water or contamination. I checked coil resistance and got .8 ohm on the primary and 6.96k spark to spark. I cleaned the pickup and rotor at the crank shaft.

AFI CYCLE BMW

AOL

Do the simple checks :sparking ,pumping fuel ?,fuel injector conector has a pool of water in it.
no spark then go after the ignition cranking module connector, magnets etc,if coil OK,reset Motronic by pullin fuse
This is a start for you

	Sign up to receive email when someone responds
	(registration is not required)

Showing posts 1 - 2 of2

Type in your comments to post to the forum

Name
(appears on your post)

Comments

Type the numbers you see in the image on the right:

Please note by clicking on "Post Comment" you acknowledge that you have read the Terms of Service and the comment you are posting is in compliance with such terms. Be polite. Inappropriate posts may be removed by the moderator. Send us your feedback.

Other Recent BMW Motorcycles Discussions

Topic	Updated	Last By	Comments
BMW Motorrad Presents New BMW S 1000 RR - Video...	Dec 4	hamza chaabani	1
horn replacement on 2009 1200gs	Nov 18	victor	2
World first in depth technical study of BMW's n... (May '07)	Nov 12	Lonna Burnam	3
r1150r	Nov 11	Mike Draga	1
2001 bmw k1200	Nov 9	AFI CYCLE BMW	3
bmw 650 f	Nov 9	AFI CYCLE BMW	2
K1200LT - Weak Power @ Low RPMs & Dangerous St... (Feb '08)	Nov 9	AFI CYCLE BMW	4