Chevrolet S-10 News

Whether it's a by-the-book restoration, a mild customization, or a full-on frame-up hot rod transformation, we classic truck hobbyists are blessed with nearly endless sources of high-quality components and accessories.

One of my first projects here at Mini Truckin' was attending the SEMA Show, and the main assignment for the event was to shoot the now infamous Gauge magazine's Air Hopper.

Hoping to see the USA in your Chevrolet Volt or Nissan Leaf? The tiny Iowa town of Elk Horn will have plenty of electric charging stations and no wait - if you can get there.The town, more than 1,500 miles from the electric car mecca of California and hundreds of miles from the nearest charging station, has four of the devices ready to power up any ...

Posted October 17, 2009, 10:49 a.m. The Plan I have had this picture in my mind for years now.

A lot can be said about top-down driving: there is no better remedy for eliminating stress and pressure from your psyche than driving down a curvy country road, not a worry percolating inside that grey matter we possess.

In everyone's life, there are a lot of lessons they learn the hard way. We learn some of these lessons quickly, such as keeping our fingers out of light sockets.

In economic times like these, everyone needs to make the most of their investments, and your personal vehicle is one of the largest investments you'll ever make.

A man reported Sept. 28 that he left his shop, Grimes Signs, located at 157 Garrett Way before the weekend and observed his son's trailer sitting in the rear of the shop, along with a 1999 GMC utility truck.

Welcome to yet another primered appearance of the Construction Zone. We hope that by seeing more unfinished rides in the raw you'll come up with some new ideas of your own to complete the ride that's collecting cobwebs in your garage.

For this month we thought we would take a different twist. Geno and Brian are brothers-brothers with similar rides, a similar upbringing, and similar interests.

Ah, to be a teenager again, knowing what we know now. Dare to dream. If it were true, we probably would have been rollin' an ultra-clean ride like Doug Pielemeier's '97 Chevy Blazer back in high school instead of a bucket.

It was a very busy Labor Day holiday weekend for thieves as 12 Colquitt County residents and two businesses reported being the victims of property theft.

You are now about to witness the strength of street knowledge. Few possess it, and those that don't are always left wondering: How did they do that so quick? Don't feel bad if you are in the latter category; so are we.

NR Dime Wheels/Tires: 20x8.5-inch KMC Venoms with 255/35 rubber Suspension/Chassis: 2,600-pound Slam 'bags, Monroe shocks, 2x3-inch tubing for frame from the firewall back for a 3.5-inch stock floor body drop, custom four-link, ART upper and lower control arms, Blazer gas tank in between the rear framerails, 1/2-inch Hellbent Customs valves Body ...

Throughout high school he constantly talked about one day owning a custom truck that would earn respect on the streets.

When we first met Tim Barrier, we couldn't help but notice that contained within this person was some of the fiercest competitive spirit we'd ever seen.

When he did the math, Cash for Clunkers simply made too much sense for Robert Halbrook to pass up.

I have a 1991 Chevrolet S-10 with the four-cylinder mill. I bought it because I had to park my Ford F-350 Dually when diesel fuel went above $4 per gallon.

Eighty cars lined the back lot Sunday at Withnell Hyundai, traded in under the federal "Cash for Clunkers" program.

Eighty cars lined the back lot Sunday at Withnell Hyundai, traded in under the federal "Cash for Clunkers" program.